Frequently Asked Questions - Astron Solar Motion Light

Question:

Will this light fix to a fence panel easily or is it too big and heavy? If so can you recommend the best sensor motion light for a fence panel please
By Elizabeth Lloyd on Jul 18,2023

Answer:

The Astron has been discontinued. However the Slimsafe light that is an upgrade can be fitter onto a fence panel as long as the measurments match

Question:

Warm or cold light I need warm do you accept return if it's not warm
By Ivan Darakev on Jan 24,2023

Answer:

It is white in colour, we do have a 30 days policy for unwanted returns if unused and installed.

Question:

Can you turn the Pir off and have the light on constant
By Bernice Roberts on May 27,2021

Answer:

I am afraid not. The pir sensor cannot be turned off on this light. 

Question:

We purchased because the dexlscription says you can tilt the angle through 180 degrees .... how do you secure once you have the light at the angle you need as there is not ratchet or screws?
By Christine Daley on May 12,2021

Answer:

You do not need a screw. Once positioned it will stay on the specific angle selected as it fits between the two ends of the light and secures there.

Question:

Do you have any lights that offer background light then light up when activated!?
By Mark on Mar 26,2021

Answer:

https://www.thesolarcentre.co.uk/products/Warwick_Solar_Wall_Light-990-56.html

The Warwick light will illuminate and when someone is approaching it will activate at full brightness. 

Question:

Hi, is the motion sensor 180 degrees?
By Alex Iliescu on Feb 18,2021

Answer:

The detection is 80 to 100 degrees. 

Question:

Hi, can you send me details of how this device is mounted and its dimensions. Thank you. Chris
By Chris on Feb 14,2021

Answer:

There is a bracket on the back which you screw onto the wall. 

 

Dimensions

 

Top 12.5cm x 16.2cm Back 16.2cm x 7cm

Question:

Can the batteries be used instead of solar
By David Brett on Jan 23,2021

Answer:

The batteries are rechargable, so they rely on the solar panel to charge them up. 

Question:

Please can you provide more details on the new "Powersaving" feature - how is it activated? - what is the effect on lumen output? - does it affect the time the light stays on when triggered or is it just a reduction in light output?
By Eric on Jan 20,2021

Answer:

Please note the PIR motion sensor (the white “bubble” on the front of the light unit) needs to be pointing to where you want any motion detected to operate the light.

1.Leave the light to charge for 3 - 5 days

2. Push and hold the light switch button to the right of the white PIR bubble after dark for approximately three seconds. The AstronSolar Motion Light will activate immediately in power saving mode and turn off again after motion has ceased.

3. Push the light switch button again briefly to activate full brightness mode

.4. To turn the light off permanently push and hold the switch button for 3 seconds.

Question:

Does the light go off completely when the PIR has not detected anything. Many similar lights, these days, revert to a low background light during dark hours. Living in a rural area, I do not want to emit light pollution.
By Malachi on Jan 11,2021

Answer:

 

The light will go out once motion has ceased.There is no background light. 

Question:

Do you have a mounting drawing for this light please ? Thanks
By William Maxwell on Jan 3,2021

Answer:

We do not have any drawnings however in the instructions that come with the light state. The Astron Solar Motion Light should be installed onto a flat vertical surface. Measure, mark and drill the screw holes. Drill the marked holes, insert wall plugs and screw the Astron Solar Motion Light into position.

 

 

Question:

Will the sensor pick up the same distance from the side ?
By JANE WHITEHURST on Nov 19,2020

Answer:

Yes it can pick up motion from the side 

Question:

Is the LUX & sensitivity of the PIR adjustable? I would use within approx 3m from the pavement and wouldn't want it triggering when people walk past the house.
By Tony Butler on Sep 21,2020

Answer:

Hi, these are not adjustable on this model, this is only adjustable on our EVO SMD Range

Question:

will it recharge on a dull winter day? Solar lights work great in summer but really poor performance in winter?
By chris berry on Sep 13,2020

Answer:

Provided that the light is in a good sunny position to re-charge and not under any eaves/roofing (as the panel is on top) then it will be fine. As it a motion activated it will last longer in the winter months as it is not on all the time. 

Question:

Would this work on a north facing wall?
By Tim Berrisford on Aug 26,2020

Answer:

We would not recommend this for a North facing wall. 

Question:

Is the solar panel on top of the light, or is the panel separate?
By Patricia James on Aug 25,2020

Answer:

The panel is on top of the light. 

Question:

Is there any way to increase the time it stays on? ie if somebody is unloading shopping from a car on a drive it would be great if it stayed on more than a few seconds.
By sam conolly on Aug 17,2020

Answer:

This light has a fixed up to 30seconds before switching off however if it detects motion it will stay on.

Question:

Hi, still a bit confused on the dimensions. Please confirm back dimensions which sits on the wall and the depth of the whole unit.
By Ninos on Aug 15,2020

Answer:

Top 12.5cm x 16.2cm Back 16.2cm x 7cm

Question:

How does this affix to the wall ? Does it have a fixing plate that screws onto the wall and the rest of the light is attached to ? Or does it just hang off screws ?
By John on Aug 4,2020

Answer:

That is correct there is a fixing plate you can screw in. 

Question:

Due to where it may have to be located, is it possible to move the angle of the white PIR bubble to pick up more to one side?
By Mark Walker on Aug 2,2020

Answer:

The PIR sensor is fixed on this light, it will pick up movement around 120 degrees 

Question:

Can you have the light on constant or is it only motion sensitive?
By Jackii Crockett on Jul 15,2020

Answer:

This is just motion activated 

Question:

Can you switch the pir off and use as a garden light
By Colin Procter on Jun 25,2020

Answer:

no unfortunately 

Question:

lost the instructions on how to switch on/off etc?
By Eddie McKnight on Jun 19,2020

Answer:

There is an on/off switch near the sensor. 

Question:

A neighbour of mine has just purchased one of these lights from yourselves.I installed it for them over the weekend above there patio doors.The light dose come on but we want to know if the length of time that the light stays on can be adjusted or even the angle of the motion sensor. Regards Mr Griffiths.
By Andrew griffiths on Jun 1,2020

Answer:

I am afraid that the angle of the sensor and the run time, once the PIR sensor triggers, cannot be adjusted on this unit.

Question:

Is there an override or on/off switch for this?
By H Which on May 6,2020

Answer:

There is an on/off switch but not an overide, this light will only work as a motion detection light. 

Question:

Could you tell me how this is fixed to the wall? Thanks
By ANN ROSS on Apr 10,2020

Answer:

Ther is bracket on the back of the light, you unscrew two screw and then pop the screws through and drill them to in the wall.

 

Question:

Hi, can you tell me if the batteries are replaceable and if so what is the battery type. Thanks.
By Michael on Mar 28,2020

Answer:

The batteries cannot be changed sadly, however these are a long life battery and should last up to 4 years. 

Question:

Please can you advise the dimensions of this product. Thanks
By Jodie cowan on Feb 10,2020

Answer:

Top 12.5cm x 16.2cm Back 16.2cm x 7cm