Frequently Asked Questions - Corona Solar PIR Security Light

I am afraid not. Please look into the Halo Solar Wall Light instead: 

No, the light will light up around the white plastic part, so enough to see who is at the door. 

105mm

Yes it will work above head height 

After Dusk press and hold the power button on the underside of the light to activate it. Each additional press of the power button will cycle through each of the modes. There are 3 different lighting modes:

1. Dim mode: after dusk the light illuminates in low brightness and switches to high brightness
when motion is detected. After motion ceases it returns to low brightness.

2. Always on: after dusk the light activates and remains on until dawn or the battery charge is
depleted, whichever comes sooner.

3. Sensor mode: after dusk the light will activate only when motion is detected. At all other
times the light will be off. We strongly recommend this mode for the late autumn and winter
months to ensure the light is only used when required. Lights installed in poor locations may
need to be used in this mode as well.
 

4 cm between the holes for the bracket and 5 cm in width and 5cm hight, 

The battery cannot be replaced on this unit.

It detects motion up to 8 metres away.

The time cannot be adjusted. This can only be done on our EVO smd range. 

The PIR sensor detects motion 8m away and 120 degrees. 

No sorry the battery is replaceable!

This is a motion-activated only light. The brightness and size of the panel would not allow an ambient light. 

ABS Plastic

this only moves upand down, it cannot be twisted to face another way. 

Without knowing what area you are trying to light up it is difficult question to answer. The light only comes out of the Band around the middle of the light, so will not shine down. 

I would look at our EVO SMD series of lights, this might be a better fit.

That is correct, the Corona panel is on top of the product.