20%
Save on solar lighting
Code HOT
Ends in
--Hrs--Min--Sec
Kingsbridge Solar Wall Light

FAQs: Kingsbridge Solar Wall Light

Frequently asked questions

Is there a way of turning these on and off remotely?

Asked by Annie on 14 Oct 2025

Hello, there is an on/of button at the front of this light you can turn it off this way if need be.

Can the motion sensor on the kingsbridge be disabled so that it just comes on as the light falls? Or do they do one without the motion sensor

Asked by Paul Spencer on 16 Sep 2023

Hello, Thank you for your question The light can stay on continuously but it would be dimmer compared to the PIR setting /mode

Is it made from metal or plastic? Thanks

Asked by Hannah Conway on 5 Feb 2023

Hi Hannah, our Kingsbridge is aluminium metal

Can the solar battery be replaced?

Asked by Sophie on 6 Jan 2023

Hi Sophie, thank you for your message, the battery in the Kingsbridge cannot be replaced

Hi, Does this have a base or is it just a frame? I'd like to put a planter at the bottom but can't if it's just empty space. Thanks!

Asked by Heffy on 2 Mar 2022

It's a frame base so you can place a plant pot to sit on the bottom.

To switch on do you click switch to left or right before holding down for 3 seconds. Also do you press once/twice/etc for different modes. Ie step 3 do you press 3 times

Asked by B. Collins on 13 Oct 2021

You have to press and hold for 3 seconds to activate the unit. You have to press the switch button to change through the modes or switch it off completely.

Hi there, Can the Kingsbridge be turned off easily when not needed or to enjoy a night sky?

Asked by Barbra on 21 Sep 2021

Yes, the on/off switch button is located next to the pir sensor.

Where is the solar panel ?Is it at the top ? I wish to place the lantern under the eves on a south facing wall and I am concerned that it would not get sufficient light to charge . Thanks

Asked by Beth on 31 Aug 2021

The solar panel is integrated and is located on top of the unit.

Can the motion sensor be turned off

Asked by Kate on 28 Aug 2021

The light can stay on continuously but it would be dimmer compared to the PIR setting /mode.

I have one and the light is very effective dusk til dawn, however the motion sensor doesn't function and I cant find the instruction manual! How do I turn it on?

Asked by Bev Walshe on 18 Aug 2021

You will have to press the switch button 3 times. On mode 3 the unit will work as a security light.

Do you need a separate solar power panel or is this integrated into the light?

Asked by Zoe on 28 Jun 2021

The solar panel is integrated.

How many lumens does this light have ?

Asked by Smita on 27 May 2021

It is 40 Lumens.

I am considering this light for a north west facing wall. It gets lost of afternoon and evening light in the summer but not so much in the winter. How effective is this light likely to be in the winter without lots of direct sunlight? Is there a minimum amount of direct sunlight for this light to work.

Asked by Gareth on 23 May 2021

This light has to be placed on a South facing wall as the solar panel is integrated.

Does the light have a setting to stay on without motion needing to be detected?

Asked by Nicola Dodoo on 21 May 2021

Yes, on mode one the light will stay on continuously but it will be dimmer (like a power saving mode).

Please can you let me know the height and width of these lights. I couldn't see it on the website. Thanks

Asked by Beth on 15 May 2021

The height is 27cm and the width is16.5cm.

Can you please let me know how strong the light is? Does it light up the front of the door or is it more a decorative light? Thanks, Tom

Asked by Thomas Palenicek on 14 May 2021

It is 40 Lumens. It will be able to cover this area.

What are the overall dimensions of the unit please??

Asked by Martyn on 13 May 2021

Dimensions Height: 27cm Width: 16.5cm Depth: 15cm

Hi Can you please let me know if this solar light is sufficient to light up the main door and also at front of the door? Is it as good as an electric light? Or is it more a decorative light? I plan to take it to Cyprus where the main door is in the direct sun for 1/2 day only, however, the sun is very strong. Thank you

Asked by Tom on 6 May 2021

It is 40 Lumens. It can be used as a welcome light.

What are the dimensions

Asked by John McQuade on 25 Apr 2021

Dimensions Height: 27cm Width: 16.5cm Depth: 15cm

Advise dimensions please

Asked by John Day on 24 Apr 2021

Height: 27cm , Width: 16.5cm , Depth: 15cm

Once activated and the light is on, will it stay on if there is little movement, eg, people sitting down around a table as you would want from a normal light?

Asked by James on 23 Apr 2021

No, this is motion only. You can choose a low light mode, but this will activate to brightness when there is movement, so would not recommend it.

Hi there, could you please advise what the dimensions are of this light. Many thanks.

Asked by NCM on 18 Apr 2021

Dimensions Height: 27cm Width: 16.5cm Depth: 15cm

Hi. Does this come with a way to shut off the motion detector? We've had one before and every time a cat walked near it in the garden, it shone brighter. Annoying if your bedroom is above it. Could you tell me how sensitive the motion detector is? Thanks.

Asked by Stephanie on 28 Mar 2021

Please see the different modes below: Mode 2: Light is set to remain at low brightness until motion is detected which activates high brightness for up to 25 seconds Mode 3: Light will only activate when motion is detected for up to 25 seconds [This is the best mode for winter] Press 1: Light ON - Press and hold for three seconds Press 2: Switch to Mode 2 Press 3: Switch to Mode 3 Press 4: Light OFF - Press and hold for three seconds There is no way of shut off the sensor.

What is the light structure made out of?

Asked by Emily on 26 Mar 2021

The light is made from aluminum.

Hi what colour is the frame please ot looks a bronze colour but would like to be sure thanks 😊

Asked by Sharon on 23 Mar 2021

It is black colour.

We have mounted the light two days ago and still no light in darkness? Have we forgot to do something, does it take battery or does it need activation?

Asked by Paul Sparke on 11 Mar 2021

Please do push the on/off button next to the sensor.

Is it possible to turn off the motion sensor and simply have the lights stay on for extended periods of time?

Asked by Jennifer on 6 Mar 2021

Yes, on mode one the light will stay on continuously but it will be dimmer (like a power saving mode).

What colour is the light

Asked by Claire Warner on 28 Feb 2021

warm white

Please can you tell me the dimensions of light? Thanks

Asked by C Powell on 24 Feb 2021

The diamention are: Height: 27cm Width: 16.5cm Depth: 15cm

What is this made from? Are the sides plastic or glass, please?

Asked by WSn on 18 Feb 2021

These are open sided, so thr eis no glass/plastic.

Will this light still work well in the short full winter months? Does it need a certain amount of light to charge?

Asked by Michael Large on 30 Jan 2021

As this is motion dection light then yes, however we strongly recommend due to the integrated panel that these are placed somewhere open without obstructions (not north facing)

Where is the solar panel located and is there an easily accessible On/Off switch?

Asked by Hema Sankaran on 27 Jan 2021

The panel is located at the top of the light, it is integral.

Can anyone tell me. The size of this light please ? Thanks

Asked by Sandra on 19 Jan 2021

27cm x 16.5cm x 15cm

could you please let me know the dimensions and how it is fixed to the wall thanks

Asked by Fran Taylor on 7 Jan 2021

Please carefully consider where you wish to install your light before making alterations to your property. It’s particularly important that the solar panel receives as much sunlight as possible. Ensure that it is not obstructed by buildings, fences, trees, sheds, etc, or the shadows that these create.If the solar panel is installed in a poor location, it may not perform to the best of its ability.The Kingsbridge can be mounted onto a flat, vertical surface,such as a wall. Once you have decided on your light base location, place and mark the two holes you need in the mountingbracket. Place the light aside, drill your two marks and mount using the supplied screws and screw plugs. Dimensions are: 27cm x 16.5cm x 15cm

Kingsbridge Solar Wall Light

£31.24

Add to Basket