- Totally DIY Best Security Product Silver Award Winner 2013
- Beautifully designed aluminium solar welcome light. Lights for 30 seconds each time it detects motion within 3 metres.
- Ideal for lighting doorways, entrances, pathways. The Curve's elegant yet contemporary design makes it ideal for locations old and new.
- Simple and safe to install. Can be set up in minutes and everything you need is in the box
- Fully waterproof. LED bulbs last for 10 years or more. 1 year full warranty.
Works in WinterA well positioned solar panel will enable this product to work in typical UK winter conditions.
No MainsThis light is solar powered and does not require mains power to work.
50 Watt EquivalentBrightness is equivalent to a 50 watt incandescent bulb as you might use in the home.
250 Triggers Per NightOnce motion is detected, this light can activate up to 250 times a night.
I have now bought 3 of these. The light is great considering it is winter and much better than my previous solar light. Good value and good service too.
By Karen on Feb 22, 2015
Fantastic - lights up my whole door area for when I come home from shifts late at night. I feel much safer and couldn't ask for more
By Donna on Feb 14, 2015
Better than anticipated
Easy to fit, worked first time in dull weather, good design and more than enough light for our "side of the house" pathway.
By Stan on Feb 12, 2015
Easy to install, and so far no problems even working in dull weather.
By Brenda on Feb 11, 2015
Nice, self-contained porch light
Perfect for finding your keys and the keyhole.
READ THE INSTRUCTIONS and if it still won't work, follow them. Keep that little pin thingy that comes with it--you'll need it once.
Thanks guys for sorting me out!
By David on Feb 10, 2015
Review the Curve Solar Motion Light
How waterproof is it?
The Curve is among the most waterproof solar lights currently available and carries an IP64 waterproof rating. The Curve is designed to withstand all the elements and within reason can be installed in exposed locations.
- 16 LED bulb solar PIR light
- Battery: Lithium Ion
- Light Source: 16 Super Bright LEDís
- Light Colour: Natural White
- On/Off Switch
Product ID: SS9826
Weight: 0.25 kg
Product Barcode: 5060188641339
(H)76mm x (W) 91mm x (D) 130mm
In the Box
- Curve Solar Motion Light
- Screws x 2
- Rawl plugs x 2
- Key Pin x 1
How to install
The Curve is among the easiest solar lights to setup because there is no separate solar panel. Installing the Curve takes a matter of minutes simply by using the 2 supplied screws. Please note that the Curve must be installed outside in an unshaded location to work.
Curve Solar Motion Light Instructions
How it works
During the day the sun charges the Curve's battery giving it the power it needs to work after dark.
After dark the Curve automatically lights up once motion is detected. The Curve stays alight until 30 seconds after motion stops. After motion has stops the Curve goes back to standby until motion is detected again. In the morning the Curve turns off automatically and begins charging ready for the night ahead. Once turned on the Curve is fully automatic, but it can be turned off completely at any time.
Frequently Asked Questions
If the light is mounted on a wall with a path following the side of the wall. Will the sensor detect movement very close to the wall and what is the expected range?
By Dudley on Feb 1, 2015
The expected sensor range is 3m from the front of the unit. The unit should work in this position so long as it is receiving direct sunlight on the solar panel.
Would the light be triggered by strong winds?
By D Yule on Jan 14, 2015
It shouldn't do. No.
Hallo, I don't have Standby-light. Only dark or full .
What is wrong?
By Klaus on Jan 13, 2015
These lights were changed earlier last year to only work on activation. They no longer support the standby-mode.